Birch Plywood FSC grade 3/4 unsanded (24*1220*2440) mm

New
Available for pre-order
Please note that we cannot fulfill orders in small quantities as it is exported from Europe, Minimum order quantity: 1 x 40 ft container. Terms of delivery: FCA .
Package weight (kg)           -  742.4
Рlywood sheet weight (kg)   -  46.4

Number of sheets in a pack        - 16...

more
Order product
Package weight (kg)           -  742.4
Рlywood sheet weight (kg)   -  46.4

Number of sheets in a pack        - 16

Number of sheets in m3          -   14

Standards  AS/NZS 2269:2004 Plywood - Structura 


Loading rates for a container

The internal volume of a 40-foot container is 67.3-67.8 m3.
The maximum carrying capacity is 24.8-26.8 tons.
The weight of a 40-foot container without cargo is 3,640-4,000 kg.


FSC birch plywood 3/4 24 mm is distinguished by high strength, exceeding analogues made from solid wood of the same species. For example, plywood with a thickness of 24 mm on a span between supports (lags) equal to 600 mm will not sag under a point load of up to 100 kg, unlike flooring from a board of the same geometric parameters. The use of phenol-formaldehyde glue causes high moisture resistance of the material - such plywood is used in outdoor construction works, as a material for arranging interfloor ceilings, erecting temporary structures, reusable formwork, packaging products. Acceptable cost makes plywood one of the most popular materials in various fields. The material of the FSC brand is not recommended for use in residential premises, since the substances that make up the adhesive are of low environmental friendliness. However, they are in a bound state, and the emission of harmful substances occurs at high temperatures.


Exterior and Interior Birch Plywood and Film Faced Plywood is a high-quality construction material with high durability and moisture resistance. Plywood is a sheet building material used in construction and furniture making. It is a manufactured product, made by gluing thin layers of wood veneer together. This product is FSC or PEFC certified.


2440mm x 1220
Thickness 7 mm 10mm 12mm 15mm 18mm 21mm
Number of layers 7 11 13 15 19 23
Divergence, mm 5 7 9 11 13 15

Additionally grade plywood possesses the following advantages:


  • Higher resistance to mechanical failure and wear
  • High durability in folding and ripping
  • High water-resistance
  • Ability to remain its operational characteristics in humidity and temperature changes
  • Ease of handling
  • Convenience in processing
  • Perfect compatibility with other building materials

Characteristics   Birch Plywood  FSC  


  • Is made from birch veneer of 3 grade, glued together in mutually perpendicular direction of fibers with glue based on resin Prefer 14J for FBV;
  • Internal layers go through a joint making line;
  • External layers go through the line of rib gluing.
  • Thickness of plywood: 7-21mm
  • Shear strength on the adhesive layer after boiling for 2 hours – not less than 1,76 Mpa
  • Size 1220 x 2440mm
  • Tensile strength along outer layers’ fiber direction, not less than: for thickness 7mm – 88,0 MPa; for
  • Thickness 10,12,14,16 mm -73,5MPa
  • Static bending strength, not less than: across outer layers’ fiber direction – 78,5 МPа, along outer layers’
  • Fiber direction – 117,5 МPа
  • Shear strength on the adhesive layer after boiling for 2 hours – not less than 1,76 Mpa
  • Density not more than 1200 Kg/m3
  • Formaldehyde emission class E1
Thickness, mm
24
Width, mm
1220
Length, mm
2440
Pack quantity, pcs.
16
Pack weight, kg
742,4
Warranty, years
25
Installation method
direct mounting
Materials
Birch wood veneer
Additions
Leave a request and we will calculate according to your requirements
Wood species
Birch

Delivery is available on weekdays from 9:00 AM to 5:00 PM. Please get in touch for pricing.  

Don't forget to buy

Accessories

Similar products